 |
Safety Gear working principle is: by security clamp lever to drive speed limiter, wire rope by tension wheel speed limiter wire rope and the friction wheel speed limiter, makes the speed limiter wheel speed consistent with the car to run faster.
When the running speed of the car (safety clamp, safety clamp lever, speed limiter wire rope, speed limiter wheel) is greater than or equal to 115% of the rated speed, the speed limiter acts, and the brake rope block presses the speed limiter wire rope to stop running, and drives the safety clamp lever to make the safety clamp action.
Safety clamp is divided into the instantaneous type pliers and progressive safety gear, instantaneous safety gear type with 0.63 m/s or less elevator, progressive safety gear used for 0.63 m/s of the elevator
This LSG10 type safety clamp is a progressive safety Gear, and its main parameters are shown below
Our LSG10 safety pliers are mainly divided into the following four models according to the different interfaces
| Model number | Interface | Rated Speed(m/s) | Tripping Speed(m/s) | Permitted P+Q(kg) | Rail Width(mm) | Rail Lubrication | Certifications |
| LSG10 | A | 0.25-2.5 | 0.29-3.22 | 4000-7000 | 15.88/16/19 | Oil | GB/CE |
| 2.5-3.0 | 0.29-3.83 | 2800-6300 | Dry | ||||
| 3.5-4.0 | 0.29-5.06 | ||||||
| B | 0.25-2.5 | 0.29-3.22 | 2800-5200 | 15.88/16 | Oil | ||
| 2600-4200 | Dry | ||||||
| C | 1600-3200 | 9/10/15.88/16 | Oil | ||||
| Dry | |||||||
| D | 650-2000 | Oil | |||||
| Dry |
Safety Gear working principle is: by security clamp lever to drive speed limiter, wire rope by tension wheel speed limiter wire rope and the friction wheel speed limiter, makes the speed limiter wheel speed consistent with the car to run faster.
When the running speed of the car (safety clamp, safety clamp lever, speed limiter wire rope, speed limiter wheel) is greater than or equal to 115% of the rated speed, the speed limiter acts, and the brake rope block presses the speed limiter wire rope to stop running, and drives the safety clamp lever to make the safety clamp action.
Safety clamp is divided into the instantaneous type pliers and progressive safety gear, instantaneous safety gear type with 0.63 m/s or less elevator, progressive safety gear used for 0.63 m/s of the elevator
This LSG10 type safety clamp is a progressive safety Gear, and its main parameters are shown below
Our LSG10 safety pliers are mainly divided into the following four models according to the different interfaces
| Model number | Interface | Rated Speed(m/s) | Tripping Speed(m/s) | Permitted P+Q(kg) | Rail Width(mm) | Rail Lubrication | Certifications |
| LSG10 | A | 0.25-2.5 | 0.29-3.22 | 4000-7000 | 15.88/16/19 | Oil | GB/CE |
| 2.5-3.0 | 0.29-3.83 | 2800-6300 | Dry | ||||
| 3.5-4.0 | 0.29-5.06 | ||||||
| B | 0.25-2.5 | 0.29-3.22 | 2800-5200 | 15.88/16 | Oil | ||
| 2600-4200 | Dry | ||||||
| C | 1600-3200 | 9/10/15.88/16 | Oil | ||||
| Dry | |||||||
| D | 650-2000 | Oil | |||||
| Dry |
